| Form Factor | 
Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters
[6.7 inches] x 170.18 millimeters [6.7 inches]) | 
| Processor Chipset | 
Intel Braswell N3350 Processor with integrated graphics | 
| Memory | 
Support for dual channel DDR3L 1867 SO-DIMMs
  | 
| 
                        	Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)                        
  | 
| 
204-pin DDR3L SO-DIMM
  | 
2 | 
| Graphics | 
                    		Integrated graphics:                       
  | 
| 
Digital displays (HD-Out)
  | 
| 
Internal flat panel displays:
  | 
| 
LVDS
  | 
| 
Embedded DisplayPort* eDP*
  | 
| 
External graphics support via a PCI Express 2.0 x1 graphics add-in card connector
  | 
| Audio | 
2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC283 audio codec supporting:                                
  | 
| 
Analog stereo line-out (back panel jack)
  | 
| 
In-chassis stereo speakers support (3 W/3 Ω via an internal header)
  | 
| Expansion Capability | 
PCI Express x1 add-in card connector
  | 
1 | 
| 
M.2 (2242/2260/2280) with USB2.0 and SATA III signal for SSD
  | 
1 | 
| 
M.2 (2230) with PCIex1 and USB2.0 signal for wireless
  | 
1 | 
| Peripheral Interfaces | 
USB 2.0 front panel ports
  | 
2 (Header) | 
| 
USB 3.0 back panel connectors (blue)
  | 
4 | 
| 
SATA 6.0 Gb/s
  | 
1 | 
| 
SATA 6.0 Gb/s port (multiplexed with an m.2 slot)
  | 
1 | 
| Legacy I/O | 
Legacy I/O Controller that provides:                        
  | 
| 
Serial port header
  | 
2 | 
| 
Parallel port via an onboard header (Option with MiAPI header)
  | 
1 | 
| LAN Support | 
                2x Intel I211-AT (10/100/1000 Mb/s) Ethernet LAN controller | 
| BIOS | 
BIOS resident in a Serial Peripheral Interface (SPI) Flash device
  | 
| 
Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)
  | 
| Hardware Management | 
                	Nuvoton NCT6793D based subsystem, including:                 | 
| 
Voltage sense to detect out of range power supply voltages
  | 
| 
Thermal sense to detect out of range thermal values
  | 
| 
2x 4-pin system fan header
  | 
| Power Requirement | 
DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
  | 
| 
Internal 2 pin power connector
  | 
| Environment | 
Operating Temperature: 0°C to +60°C
  | 
| 
Storage Temperature: -20°C to +70°C
  | 
| Safety | 
CE
  | 
| 
FCC |